If there are any questions, please contact:

[ insert your contact details here ]

This is a four (4) layer board.  
FR4
.062" thick


There are some important details on this fabrication.  See the enclosed PDF-format drawing for details.


The following files are included:

Readme.txt	This file
PENELOPE.PDF	Drawing with important information on this fabrication.

PENELOPE.BOT	Bottom layer
PENELOPE.DRD	Drill drawing
PENELOPE.GND	Ground plane
PENELOPE.GTD	Design file
PENELOPE.PWR	Power plane
PENELOPE.SMB	Bottom solder mask
PENELOPE.SMT	Top solder mask
PENELOPE.SPB	Bottom solder paste (not used for PCB fab)
PENELOPE.SPT	Top solder paste (not used for PCB fab)
PENELOPE.SSB	Bottom silkscreen
PENELOPE.SST	Top silkscreen
PENELOPE.TOP	Top layer

PENELOPE.DTS	Drill tape summary report
THRUHOLE.TAP	Drill file for plated holes
THRUHOLE.NPT	Drill file for non-plated holes

Stack order:

Top silkscreen
Top solder mask
Top layer
Power plane
Ground plane
Bottom layer
Bottom solder mask
Bottom silkscreen

[end of file]

